-
Created On: 09/25/2015
in Wave IP Installation BCS System requirements
•
Two identical Wave s. BCS requires two identical-model Wave s. This means that if the primary Wave is a current-model ISC3 IP 2500, the secondary Wave must ...
-
Created On: 09/25/2015
in Wave IP General Concepts Wave Business Continuity Service (BCS) performs automated backups from the primary Wave to a second Wave that is active on the network and available for failover as needed. The failover process supports all Wave applications, including Conta...
-
Created On: 09/25/2015
in Wave IP Installation BCS BCS is used to provide quick failover for business critical communications (see Business Continuity Service (BCS) Overview ).
Make sure BCS Requirements are addressed (see Business Continuity Service (BCS) Requirements ).
Config...
-
Created On: 09/24/2015
in Wave IP Common Tasks Hard drive partitions on the Wave have historically been limited to a fixed size regardless of the actual hard disk size, resulting in unused, inaccessible space. Now you can extend disk drive partitions to access that unused space. Depending on the...
-
Login to User/Group Management (see Login to User/Group Management ).
Double-click on the User in the Users list to open the user record.
NOTE: The user must be configured with a supported IP phone type (Edge 9800 series phon...
-
NOTE: When using 9800 series IP phones, it is highly recommended that the VPN phones not use the "Log in to Device" method for initial configuration. Explicitly set the phone's MAC address instead.
Login to User/Group Management...
-
Configure the network router to forward port 1194 to port 1194 on the OpenVPN server.
NOTE: It is possible to use a different public port than 1194. Just make sure that the port forward on the router still points to 1194 on the Open Serve...
-
Login to the OpenVPN Server (see Login to OpenVPN Server ).
From the desktop, click System > Preferences > Network Connections.
On the Wired tab, click Add. If a network connection is already displayed, click Edit
i...
-
Created On: 09/22/2015
in Wave IP Common Tasks There are three possibilities: Custom, Applications Server , Vertical OpenVPN Image
Using a custom OpenVPN Server will require using the login procedure for that device.
NOTE: This option refers to a 3rd-party hardware or s...
-
The first step is to configure the OpenVPN Server with an IP address. with the Off-Wave configuration mode, this will be the only step that requires logging on to the OpenVPN server. See Set OpenVPN Server IP Address .
Next, set up the...